TRAVEL CHECKERS BOARD AND PIECES

Posted by CraftFoxes Staff on
0.0 rating
Travel Checkers Board and Pieces

A fabric travel checkers board is an easy kid craft that also encourages engaging road-trip distraction (as well as easy clean-up). The felt checkers are reversible while the fabric checkerboard doubles as a storage bag. Even better, this unique kid craft rolls up and ties to fit neatly into your luggage.

Adapted from Sew What You Love: The Easiest, Prettiest Projects Ever by Tanya Whelan, published by Potter Craft. Images by Tanya Whelan.

FINISHED MEASUREMENTS

  • 151⁄2x 151⁄2 (39.5cm x 39.5cm), unrolled

YARDAGE FOR CHECKERBOARD AND BAG:

  • 1⁄2 yd (45.5cm) of 44/45" (112/114cm) printed cotton fabric (fabric A)
  • 1⁄4 yd (23cm) of 44/45" (112/114cm) contrasting printed cotton fabric (fabric B)
  • 18x 18 (45.5cm) square of solid-color felt for backing

FOR FELT CHECKERS:

  • 1⁄4 yd (23cm) each of felt in two solid (light and dark) colors

SUPPLIES

  • Basic sewing supplies
  • Iron
  • 14(35.5cm) length of 1⁄2 (13mm) sew-in hook-and-loop tape
  • 36" (91cm) length of ribbon or twill tape for tie
  • Pinking shears (optional)

Source ,Amazon.com: Sew What You Love: The Easiest, Prettiest Proj...

Step 1

MEASURE AND CUT THE FABRIC

Precision in marking and cutting will really impact the final outcome of this project. Following the diagram, measure and cut an 18(45.5cm) square from fabric A for the bag. Then measure and cut four 21/2 x 20"(6.5cm x 51cm) strips from fabric A and four from fabric B for the checkerboard.

Zoom Image

Step 2

SEW STRIPS TOGETHER

With right sides facing, pin and sew the long edges of contrasting strips together, alternating prints (i.e., fabric A, B, A, B, etc.). Press the seams open. Mark and cut eight 2 1/2(6.5cm) strips horizontally across the joined strips. To reinforce the seams, topstitch the long edges of each strip a little less than 1/4 (6mm) from the edge.

Zoom Image

Step 3

MAKE THE CHECKERBOARD

Pin the long edges of two strips together with right sides facing, alternating the prints. Sew the strips together along one long edge, aligning the seams as you go. Add the remaining strips in the same way to form the checkerboard. Press all seams open.

Zoom Image

Step 4

ADD FELT BACKING TO THE CHECKERBOARD

Center the checkerboard with right side facing the 18(45.5cm) felt square and align top edges. Pin the layers together. Sew the top edges together. Trim the seam to 1/8(3mm). Cut away any excess felt on the sides and bottom, even with the checkerboard.

Zoom Image

Step 5

ADD THE HOOKED STRIP TO THE FELT

Fold the right side of the checkerboard over the felt so that the right side of the checkerboard is facing out and press flat. Topstitch the top folded-over edge 1/4" (6mm) from the seam. Center and topstitch the hooked strip of hook-and loop tape to the felt at the top edge.

Zoom Image

Step 6

ADD THE LOOPED STRIP TO THE BAG

Press the top edge of the 18(45.5cm) square of fabric A to the wrong side by 1/2 (13mm) and again by 1/2" (13mm). Topstitch close to the edge. Center and topstitch the looped strip of hook-and-loop tape to the underside of the finished top edge.

Step 7

SEW THE LAYERS TOGETHER

With right sides together, align the top edges of the checkerboard and fabric A. Pin all layers (felt, checkerboard, and fabric) together, and trim away any excess fabric. Sew along the three raw edges, leaving the top open. Trim the seam to 1/8" (3mm), and clip the corners. Turn the bag right side out and press.

Zoom Image

Step 8

SEW ON TIE

Topstitch the sides and bottom edges. Press the short ends of ribbon or tape under 1/4" (6mm) twice, and sew across to anchor the folded ends. Sew the middle of the tie to the bottom front edge of the checkerboard using a few backand-forth stitches to anchor it securely.

Zoom Image

Step 9

MAKE REVERSIBLE CHECKERS

Trace the checker template onto cardboard or cardstock and cut it out. From the dark and light solid-color felt, cut out two strips from each color, each 21/4" (5.5cm) wide. Place one dark strip on top of a light strip, and pin the circle template on top of the two layers of felt. Sew around the template using a small zigzag stitch; don’t sew on the template itself. Cut out the checker close to the stitching using pinking shears or regular scissors. Make the remaining 23 checkers in this way.

Tip: Make a few extra checkers just in case

Zoom Image